BS EN ISO 6807:2003

Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications. | Status: Proposed for withdrawal, Current

1 Scope This International Standard specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This International Standard applies to hoses which are suitable for use at ambient temperatures between − 20 °C and + 52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This International Standard does not apply to hoses which are intended for use with gases.