What is ISO 7539‑10 about?
ISO 7539‑10 is the 10th part of a multi-series standard. It deals with stress corrosion testing for metals and alloys using the reverse U-bend method.
ISO 7539‑10 specifies procedures for designing, preparing and using reversed U-bend (RUB) test specimens for investigating the susceptibility of the metal to stress corrosion cracking.
ISO 7539‑10 introduces very severe stresses in a high corrosion resistance metal, with minimum relaxation, in order to enhance the likelihood of inducing stress corrosion cracking.
Who is ISO 7539‑10 for?
ISO 7539‑10 on stress corrosion testing for metals and alloys is applicable to:
- Manufacturers of metals and alloy components
- Dealers and importers of metals and alloy components
- Testing houses for metal and alloy components
Why should you use ISO 7539‑10?
Corrosion in metal equipment or structures can compromise their functionality. Prolonged corrosion on metals can inflict severe stress on them and devaluate the metals physical properties. Regular tests should be performed to identify corrosion stress in metals to keep them well maintained.
ISO 7539‑10 provides you with guidance on the reverse U-bend method for corrosion stress testing. It is used as a screening test for tubing, piping, plate, bar and other products including welded materials. The RUB test is a particularly effective test for assessing susceptibility to stress corrosion cracking.
The RUB test described in ISO 7539‑10 is simple and provides rapid screening of corrosion cracking for metals and alloys
What’s changed since the last update?
BS EN ISO 7539‑10:2020 supersedes BS EN ISO 7539‑10:2014, which is now withdrawn.
Changes in BS EN ISO 7539‑10:2020 include:
- The specimen preparation, i.e. how RUB specimens are machined, bent and fastened, has been revised in Clause 5 and Annexes A and B
- The experimental procedure of how specimens are tested in a multiple immersion test with different periods or in a serial immersion test has been revised in Clause 6
- The post-exposure evaluation of how specimens are observed has been revised in Clause 7 and information has been added for the test report in Clause 8
- Figures A.1, A.2 and B.3 and Table B.1 have been revised
- New Figures A.3 and B.4 have been added to illustrate the RUB specimen before and after fastening
