BS EN ISO 844:2014

1. a) the compressive strength and corresponding relative deformation,

1. b) the compressive stress at 10 % relative deformation,

1. c) when desired, the compressive modulus of rigid cellular plastics.

• — Procedure A employs crosshead motion for determination of compressive properties. Procedure A is intended to be used when compressive stress at 10 % relative deformation has to be determined.
• — Procedure B employs strain measuring devices mounted on the specimen (contact extensometer) or similar device which measures directly sample deformation. Procedure B is intended to be used when compressive modulus has to be determined.

NOTE Compressive strength (at maximum load) can be determined either with Procedure A and B.