BS F 154:2006

Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification. | Status: Confirmed, Current

1 Scope This British Standard specifies requirements for fluorosilicone rubber material possessing excellent ozone resistance properties intended for the production of items such as sheet, mouldings and certain extrusions for use in sealing applications in contact with petroleum based fuels, hydraulic fluids and lubricants and with silicone and certain ester based fluids over the temperature range -60 °C to 150 °C1). For applications in air the material is suitable over the temperature range -60 °C to 180 °C. This material standard is to be used in conjunction with BS EN 3207.

NOTE 1 Material and products manufactured from this specification, when used in air, may be used up to 200 °C for short intermittent periods.

NOTE 2 Material and products manufactures from this specification are not intended for use in contact with phosphate esters.

NOTE 3 Further information on the suitability of fluorosilicone rubber for design applications can be found in SBAC Technical Specification No. 97 [1].

NOTE 4 Marking BS F 154:2006 on or in relation to a product represents a manufacturer’s declaration of conformity, i.e. a claim by or on behalf of the manufacturer that the product meets the requirements of the standard. The accuracy of the claim is solely the claimant’s responsibility. Such a declaration is not to be confused with third party certification of conformity.