What is BS IEC 61196‑6‑5 about?
BS IEC 61196 is a series on coaxial communication cables. Coaxial cable is a type of electrical cable that carries high-frequency electrical signals. Coaxial cables are used in telephone lines, broadband internet cables, and cable television signals. They are preferred for their low losses in signal.
BS IEC 61196‑6‑5 specifies the requirements for type A quad-shield CATV drop cables with screening class A++. These cables are used in CATV distribution systems, surveillance and control systems, satellite television receiving systems and bidirectional hybrid fibre coaxes (HFC). The operating frequency is up to 3000 MHz.
Who is BS IEC 61196‑6‑5 for?
BS IEC 61196‑6‑5 on coaxial communication cables is useful for:
- Telecommunication equipment manufacturers
- Design engineers
- Research and development facilities
Why should you use BS IEC 61196‑6‑5?
Coaxial communication cables consist of an inner conductor surrounded by a concentric conducting shield, with the two separated by a dielectric (insulating material). Many coaxial cables also have a protective outer sheath or jacket. BS IEC 61196‑6‑5 discusses requirements for type A quad-shield CATV drop cables.
Drop cables are constructed using a copper-plated steel centre conductor, foamed dielectric, a shield made up of at least one layer of aluminium foil and one layer of an aluminium braid, and a plastic jacket.
Using BS IEC 61196‑6‑5 you get specifications for manufacturing type A quad-shield CATV drop cables. Using these cables, your end-users will have the flexibility of movement, and also the ability to connect and disconnect easily.
