What is BS IEC 63145-20-10 - Optical properties of eyewear display about ?
BS IEC 63145‑20‑10 is an international standard used for eyewear displays that specifies the measuring methods for evaluating the optical properties of eyewear displays.
BS IEC 63145‑20‑10 is the 20th part of the eyewear display in multi-series.
BS IEC 63145‑20‑10 specifies the standard measurement conditions and measurement methods for determining the optical properties of eyewear displays.
Note 1: BS IEC 63145‑20‑10 applies to non-see-through type (virtual reality “VR” goggles) and see-through type (augmented reality “AR” glasses) eyewear displays using virtual image optics.
Note 2: Contact lens-type displays and retina direct projection displays are out of the scope of this document.
Who is BS IEC 63145‑20‑10 - Optical properties of eyewear display for ?
BS IEC 63145‑20‑10 on eyewear display is useful for:
- Manufacturers of eyewear products
- Manufacturers of 3D glasses
- Manufacturers of virtual gaming googles
- Research laboratories
Why should you use BS IEC 63145‑20‑10 - Optical properties of eyewear display ?
Eyewear display glasses are used for vision clarity. This display helps in creating virtual reality images with the help of new technologies.
BS IEC 63145-20-10 is useful in indicating the spatial positions of virtual images with the help of a spherical coordinate system of elevation and azimuth. The darkroom condition helps in contributing luminance from the background while performing the test. The measurement equipment mentioned in BS IEC 63145-20-10 helps in measuring light accurately.
By measuring the luminance colour and contrast ratio, you can evaluate the optical characteristics of eyewear displays. With the help of BS IEC 63145-20-10, you can measure the luminance and luminance uniformity and also evaluate the chromaticity area and colour gamut of DUT in eyewear displays. The field of view (FOV) is useful for you in determining the performance of DUT.
BS IEC 63145-20-10 specifies the measurement methods and equipment that helps in measuring the optical properties of eyewear displays. The standard condition is useful for conducting the tests in different climatic conditions. This ensures the sustainability of eyewear displays in different environmental conditions and results in producing good quality eyewear displays.
