BS ISO 10945:1994

Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports. | Status: Withdrawn

1 Scope This International Standard specifies the types and the dimensions of the gas filling ports of gas-loaded accumulators used in hydraulic fluid power systems. It describes two male ports for filling the gas side of a gas-loaded accumulator. These ports are designated by the following:

• — male port with M16 × 2 thread, in accordance with ISO 261 and ISO 724, which is preferred for new designs (see 4.1);
• — male port with 8V1 thread in accordance with ISO 4570-1 (see 4.2).