What is ISO 13909-1- Hard coal and coke — Mechanical sampling about?
ISO 13909-1 defines the basic terms used in the sampling of solid mineral fuels, describes the general principles of sampling, and details the information to be provided in the documentation and the sampling report.
ISO 13909-1 also lists the other parts and gives guidance on the selection of the appropriate part.
Note: ISO 13909 does not include a sampling of brown coals and lignites, or sampling from coal seams, for which guidance is given in ISO 14180. A manual sampling of coal and coke is covered in ISO 18283.
Who is ISO 13909-1- Hard coal and coke — Mechanical sampling for?
ISO 13909-1 on hard coal and coke — Mechanical sampling is useful for:
- Coal industry
- Sampling agencies
- Testing houses and laboratories
Why should you use ISO 13909-1- Hard coal and coke — Mechanical sampling?
The purpose of taking and preparing a sample of fuel is to provide a test sample which, when analyzed, will provide test results representative of the lot sampled.
Mechanical sampling systematically removes a portion of the stream of material for a sample. Mechanical sampling is widely used in cone preparation plants and concentrators where large quantities of materials are to be sampled,
ISO 13909-1 provides detailed operating protocols to ensure uniform and consistent collection, weighing, and processing of samples. This includes the preparation of facilities and assembly of all equipment necessary for the collection of samples, processing and packaging them, and transporting them from the collection and weighing sites to processing facilities and to the laboratory for analysis in an efficient manner.
What’s changed since the last update?
BS ISO 13909-1:2016 supersedes ISO 13909-1:2001. BS ISO 13909-1:2016 has been technically revised.
