BS ISO 16915:2003

Tools for moulding. Sprue pullers. | Status: Current, Under review

1 Scope This International Standard specifies the main dimensions and tolerances, in millimetres, of sprue pullers, which are used mainly in injection moulds for plastics and rubbers. See the example of application in Figure 1. It also specifies the material, hardness and designation of sprue pullers conforming to this International Standard. Figure 1 — Application example of sprue pullers 1 ejector pin (ISO 6751) 2 sprue puller (ISO 16915) 3 locating ring (ISO 10907‑1) 4 sprue bush (ISO 10072) 5 parallel pins (ISO 8734)