BS ISO 17386:2010 Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
BS ISO 17386 is an International Standard which addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with MALSO systems.
It specifies minimum functionality requirements which the driver can generally expect of the device, i.e. detection of and information on the presence of relevant obstacles within a defined (short) detection range. It defines minimum requirements for failure indication as well as performance test procedures; it includes rules for the general information strategy but does not restrict the kind of information or display system.
MALSO systems use object-detection devices (sensors) for ranging in order to provide the driver with information based on the distance to obstacles. The sensing technology is not addressed; however, technology affects the performance-test procedures set up in BS ISO 17386. The current test objects are defined based on systems using ultrasonic sensors, which reflect the most commonly used technology at the time of publishing. For other sensing technologies possibly coming up in the future, these test objects shall be checked and changed if required.
Visibility-enhancement systems like video-camera aids without distance ranging and warning are not covered by this International Standard.
Reversing aids and obstacle-detection devices on heavy commercial vehicles are not addressed by BS ISO 17386; requirements for those systems are defined in ISO/TR 12155.
Contents of BS ISO 17386:
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Functional and performance requirements
5.1 System activation
5.2 Driver interface and information strategy
5.3 Dynamic performance of object detection
5.4 Monitoring range coverage
5.5 Self-test capabilities and failure indication
5.6 Operation with trailers
6 Requirements and tests components
7 Operational test of obstacle detection
7.1 Test object
7.2 General ambient conditions
7.3 Test procedure
Annex A (informative) Test methods
Bibliography
