What is ISO 20934 - Road vehicles - Fuse-links with axial terminals about?
ISO 20934 specifies fuse-links with axial terminals (Strip fuse-links) Types SF36‑70V, SF51‑70V and SF56‑70V used in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements, and dimensions.
ISO 20934 is applicable to fuse-links with a rated voltage of 70 V DC, a rated current of 30 A to 500 A, and a breaking capacity of 2 500 A intended for use in the electrical system of road vehicles with a nominal voltage of 48 V DC.
ISO 20934 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to this document.
Who is for ISO 20934 - Road vehicles - Fuse-links with axial terminals for?
ISO 20934 on Road vehicles — Fuse-links with axial terminals for use in 48V networks — Types SF36-70V, SF51-70V and SF56-70V is applicable to:
- Road vehicle manufacturers
- Fuse links manufacturers
- Axial manufactures
- Battery manufacturers
Why should you use BS ISO 20934 - Road vehicles - Fuse-links with axial terminals?
ISO 20934 establishes, for the fuse-link types, the rated current, test procedures, performance requirements. These test procedures can be used by you to improve the performance of the vehicle.
ISO 20934 provides dimensions of the fuse link which aids you in designing the fuse links.
ISO 20934 lays out the design and test requirements so that the test can be carried out effectively.
