BS ISO 21635:2018

Ships and marine technology. Specification of high manganese austenitic steel used for LNG tanks on board ships. | Status: Current, Under review

1 Scope This document describes the specification of high manganese (Mn) austenitic steel plates to be used for LNG tanks on board ships. The specification of high manganese austenitic steel can be also considered for design and manufacture of cargo tanks and process pressure vessels of LNG supply/terminal and transportation of fuels and traded gases. This document is primarily applicable for the specification of LNG tanks below volumetric capacity of approximately 30 000 m3 using high manganese austenitic steel. The thickness of plates is limited to between 6 mm to 40 mm.