BS ISO 6967:2006

Aircraft ground equipment. Main deck container/pallet loader. Functional requirements. | Status: Confirmed, Current

1 Scope This International Standard specifies the functional requirements for a self-propelled loader capable of raising air cargo unit load devices (ULDs) with base dimensions and maximum mass as given in Table 1. Table 1 — Base dimensions and maximum mass ISO 8097:2001 base size code Length Width Maximum gross mass mm (in) mm (in) kg (lb) A 3 175 (125) 2 235 (88) 6 804 (15 000) M 3 175 (125) 2 438 (96) 6 804 (15 000) R 4 978 (196) 2 438 (96) 11 340 (25 000) G 6 058 (238,5) 2 438 (96) 13 600 (30 000) This International Standard does not provide all the design requirements applicable for aircraft main deck loaders. Other requirements can be found in separate International Standards:

• — ISO 4116 specifies the additional requirements applicable for conveying surfaces of those pieces of aircraft ground support equipment intended for handling and loading of baggage and cargo unit load devices;
• — ISO 6966‑1 and ISO 6966‑2 specify, respectively, the general and safety-related requirements applicable to all aircraft ground support equipment.

The requirements of this International Standard were determined based on generally recognized assumptions with regard to

1. a) the normally intended use of aircraft ground support equipment, when used on the ramp of international civil airports in order to handle, service or maintain civil transport aircraft;
2. b) the environmental (surface, slope, weather, lighting, operating rules, staff qualification, etc.) conditions prevailing on the ramp area of the majority of international civil airports.

It is assumed the manufacturers of aircraft main deck loaders define in the relevant documentation the specifically intended conditions of use and environment for each item of equipment, and the purchasers systematically review their own specific conditions of use and environment in order to determine whether those stated are adequate, or negotiate with the manufacturer appropriate modifications to ensure they are.