What is BS QC 222000 - RF coaxial connectors with screw coupling about?
BS QC 222000 is an international standard used for Radio-frequency connectors that specifies the dimensions and outline drawings. This helps in manufacturing good quality RF coaxial connectors with screw coupling.
BS QC 222000 concerns miniature r.f. coaxial connectors for use with r.f. cables both flexible (preferred cables 96-2 IEC 50-3 and 96-2 IEC 50-2) and semi-rigid, where a dielectric filled interface is required for severe environmental exposure.
This type is a screw coupled connector known commercially as the TNC connector and was derived from the bayonet coupled connector known as the BNC (IEC Publication 169-8: Radio-frequency Connectors - R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 6.5 mm (0.256 in) with Bayonet Lock — Characteristic Impedance 50 ohms (Type BNC).
Patterns and Grade 1 connectors are under consideration.
Who is BS QC 222000 - RF coaxial connectors with screw coupling for?
BS QC 222000 on RF coaxial connectors with screw coupling is useful for:
- Manufacturer of electronic components
- Telecommunication industries
- Information technology companies
- Electronic engineer
Why should you use BS QC 222000 - RF coaxial connectors with screw coupling?
Radiofrequency coaxial connector is an electrical connector designed to work at radio frequencies in the multi-megahertz range.
BS QC 222000 specifies the dimensions of these RF coaxial connectors. This helps in designing and constructing these connectors. With the help of BS QC 222000, you can conduct the tests in a systematic order according to the test pattern. By applying BS QC 222000, you can standardize the manufacturing process that results in designing and manufacturing good quality RF coaxial connectors with screw coupling.
