DD CEN/TS 12977-4:2010 Thermal solar systems and components. Custom built systems. Performance test methods for solar combistores
DD CEN/TS 12977-4 is a Technical Specification which specifies test methods for the performance characterization of stores which are intended for use in small custom built systems.
Stores tested according to this document are commonly used in solar combisystems. However, also the thermal performance of all other thermal stores with water as storage medium (e.g. for heat pump systems) can be assessed according to the test methods specified in this document.
DD CEN/TS 12977-4 applies to combisstores with a nominal volume up to 3 000 l and without integrated burner.
DD CEN/TS 12977-4 is extensively based on references to BS EN 12977-3:2008.
Contents of DD CEN/TS 12977-4:
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Store classification
6 Laboratory store testing
6.1 Requirements on the testing stand
6.1.1 General
6.1.2 Measuring data and measuring procedure
6.2 Installation of the store
6.2.1 Mounting
6.2.2 Connection
6.3 Test and evaluation procedures
6.3.1 General
6.3.2 Test sequences
6.3.3 Data processing of the test sequences
7 Test report
7.1 General
7.2 Description of the store
7.3 Test results
7.4 Parameters for the simulation
Annex A (normative) Store model benchmark tests
Annex B (normative) Verification of store test results
Annex C (normative) Benchmarks for the parameter identification
Annex D (informative) Requirements for the numerical store model
Annex E (informative) Determination of hot water comfort
E.1 General
Bibliography
