What is DD IEC/PAS 61249-6-3 ā Finished fabric woven from āEā glass used in printed boards about?
DD IEC/PAS 61249-6-3 is an international standard used for the specification for a finished fabric woven from āEā glass for printed boards. DD IEC/PAS 61249-6-3 specifies the requirements and test methods for a finished fabric woven used in printed devices. This helps in manufacturing good quality finished fabrics used in printed boards.
DD IEC/PAS 61249-6-3 covers finished fabrics woven from Eā glass electrical grade glass fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave.
Who is DD IEC/PAS 61249-6-3 - Finished fabric woven from āEā glass used in printed boards for?
DD IEC/PAS 61249-6-3 on specification for finished fabric woven from āEā glass for printed boards is useful for:
- Manufacturer of printed circuit boards
- Manufacturer of electronic devices
- Manufacturer of automotive parts
- Electronic engineer
Why should you use DD IEC/PAS 61249-6-3 - Finished fabric woven from āEā glass used in printed boards?
Printed boards are useful in supporting mechanically and electrically. This helps in connecting electronic components using conductive pathways, tracks, or signals.
DD IEC/PAS 61249-6-3 specifies the requirements, test methods, and test procedure for a finished fabric woven from āEā glass used in printed board. The test methods are as follows:
- Fabric appearance is useful in identifying the defects related to fabric woven
- Fabric count helps in counting the number of yarns is to be used in this process
- Measures the fabric thickness by using the equipment
- Useful in calculating weight per unit area
- Fabric length and width are measured by using measuring device
- Bias or bowed filling is useful in measuring distance between the mark and the baseline of yarn
By applying DD IEC/PAS 61249-6-3 you can manufacture good quality finished fabric woven from āEā glass used in printed boards.
