What is PD CLC/TR 50083-2-2 - Cable networks for television signals, sound signals and interactive services about?
PD CLC/TR 50083 is a series on cable networks for television signals, sound signals and interactive services. Cable networks are networking hardware used to connect one network device to other network devices or to connect two or more computers to share printers, scanners etc. PD CLC/TR 50083-2-2 deals with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing, and transmitting all kinds of data signals for interactive services using all applicable transmission media. These signals are typically transmitted in networks by frequency-multiplexing techniques. For instance, this includes:
- Regional and local broadband cable networks
- Extended satellite and terrestrial television distribution systems
- Individual satellite and terrestrial television receiving systems
and all kinds of equipment, systems and installations used in such cable networks, distribution and receiving systems. The extent of PD CLC/TR 50083-2-2 is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input of the customer premises equipment. PD CLC/TR 50083-2-2 will consider coexistence with users of the RF spectrum in wired and wireless transmission systems.
Note: The standardization of any user terminals (i.e., tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial, balanced, and optical cables and accessories thereof is excluded.
Who is PD CLC/TR 50083-2-2 - Cable networks for television signals, sound signals and interactive services for?
PD CLC/TR 50083-2-2 on cable networks for television signals, sound signals and interactive services is useful for:
- Telecommunication component manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
Why should you use PD CLC/TR 50083-2-2 - Cable networks for television signals, sound signals and interactive services?
The radiated fields produced by LTE Base Stations (LTE-BS) need special and careful attention when received by individual or community antenna television systems because of high-level signals injected at the input port of wideband amplifiers placed on the antenna mast or in the headend. These high-level disturbing signals in the 800 MHz band are able to cause interference problems by producing overload and/or strong intermodulation products in wideband amplifiers and disturb or even prevent the reception of digital television signals (DVB-T) broadcast in VHF/UHF bands. This interference problem, in a frequency band previously assigned to terrestrial television broadcasting and now to broadband telecommunication services, can be avoided or reduced both with an appropriate suitable screening efficiency of the cable network and equipment and by using an appropriate and suitable filter (LTE filter) to attenuate the 800 MHz band signals received by the television antenna system and injected (conducted interference) at the input port of wideband amplifiers.
Some examples of EMC requirements relating to LTE-BS disturbing signals are described in PD CLC/TR 50083-2-2 and the main characteristics of a typical LTE filter are indicated. These additional EMC requirements for cable networks and equipment, resulting from the assignment of the 800 MHz band to LTE services are based on the expected field strengths in the 800 MHz band due to both LTE User Equipment (LTE-UE) and LTE Base Station (LTE-BS), considered as disturbing signals, the field strengths planned for terrestrial television broadcasting in the UHF band, up to 790 MHz (e.g., ch. 60) and the required protection of television signals with respect to both LTE-UE and LTE-BS disturbing fields. Both LTE-BS disturbing effects and LTE-UE disturbance effects and protection requirements are therefore considered in PD CLC/TR 50083-2-2. Using PD CLC/TR 50083-2-2 you can understand cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television and sound signals and for processing, interfacing, and transmitting all kinds of data signals for interactive services using all applicable transmission media.
