What is PD CLC/TR IEC 62453-51-10 - FDT object model about?
PD CLC/TR IEC 62453-51-10 is a part of the IEC 62453-51, which is a Technical Report, provides additional information for integrating the FOUNDATIONâ„¢ Fieldbus1 (FF) protocol into the COM-based implementation of the Field Device Tool (FDT) Specification (IEC TR 62453-41).
PD CLC/TR IEC 62453-51-10 provides you with guidelines for FDT which is a high-level statement that includes the information needed to define the user groups who will be the focus of the usability engineering process and the use environment in which the device will be utilized. PD CLC/TR IEC 62453-51-10 describes communication definitions, protocol-specific extensions and the means for block (e.g. transducer, resource or function blocks) representation. The protocol-specific definitions are based on FF-Specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF devices. The scope is limited to Foundation Fieldbus device and system-specific definitions.
PD CLC/TR IEC 62453-51-10 specifies the implementation of communication and other services based on IEC 62453-301.
Note: PD CLC/TR IEC 62453-51-10 neither contains the FDT specification nor modifies it.
Who is PD CLC/TR IEC 62453-51-10 – FDT object model for?
PD CLC/TR IEC 62453-51-10 on FDT object model is useful for:
- The IT industry 
- Software programmers 
- FDT developers 
- Client-server producers 
- Networking sectors 
Why should you use PD CLC/TR IEC 62453-51-10 - FDT object model?
PD CLC/TR IEC 62453-51-10 as a part of the IEC 62453 series is an interface specification for developers of FDT components for function control and data access within a client/server architecture. PD CLC/TR IEC 62453-51-10 is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integration of fieldbuses into control systems, there are a few other tasks that need to be performed. In addition to Fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance.
A device-specific software component, called Device Type Manager (DTM), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kinds of fieldbuses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Using these guidelines, you enable your end customers to improve their work efficiency.  
