What is PD IEC/TR 63042-100 – UHV AC transmission systems about?
PD IEC/TR 63042-100 is an international standard and a part of the PD IEC/TR 63042 series that discusses the general information for UHV AC transmission systems. UHV transmission is significantly advantageous in increasing transmission capacity, reserving land resources, reducing transmission losses, and reducing project investment.
PD IEC/TR 63042-100 specifies the reference for the standards and guidelines for UHV AC transmission systems. PD IEC/TR 63042-100 provides an overview of these standards as well as guidelines.
PD IEC/TR 63042-100 is developed to clarify standardization items and/or guideline items for UHV AC transmission systems. It describes the items to be considered for each stage of planning, design, construction, commissioning, operation, and maintenance during the development of IEC publications for UHV AC transmission systems.
Who is PD IEC/TR 63042-100 – UHV AC transmission systems for?
PD IEC/TR 63042-100 on UHV AC transmission systems applies to:
- Manufacturer of AC transmission lines
- Electrical engineer
- Quality testing personnel
Why should you use PD IEC/TR 63042-100 – UHV AC transmission systems?
UHV AC is the highest voltage of the AC transmission system exceeding 800kV. UHV transmission is significantly advantageous in increasing transmission capacity, reserving land resources, reducing transmission losses, and reducing project investment.
PD IEC/TR 63042-100 describes both specific issues to UHV AC transmission systems and common issues of UHV AC and lower voltage transmission systems because it is very easy to understand UHV AC transmission systems as a whole. PD IEC/TR 63042-100 provides you with the transmission line which is the most important component in a UHV AC transmission system, so it should have enough reliability against weather conditions, geology, topography, and environmental impact.
As a user of PD IEC/TR 63042-100, you can acquire general information for UHV AC transmission systems.
