What is PD IEC/TS 62607-4-4 – Thermal characterization of nanomaterials about?
PD IEC/TS 62607-4-4 is the fourth subpart of the fourth part of the multi-series international standard that focuses on the thermal characterization of nanomaterials. PD IEC/TS 62607-4-4 provides a measurement method for thermal runaway quality level tests for nano-enabled energy storage devices. PD IEC/TS 62607-4-4 uses comparative measurement to enable a manufacturer to decide whether or not the nanomaterial additives used in energy storage devices are resilient against the thermal runaway caused by a faulty or accidental low resistance connection between two or several internal points depending on the number of stacking electrode layers of the test sample.
Note-
PD IEC/TS 62607-4-4 does not apply directly to the safety testing for energy storage device products due to complex safety design schemes embedded in these products.
Who is PD IEC/TS 62607-4-4 - Thermal characterization of nanomaterials for?
PD IEC/TS 62607-4-4 on thermal characterization of nanomaterials is useful for:
- Battery manufacturing companies
- Nanomanufacturing companies
- Testing laboratories
- Engineers and designers of nano-enabled electrical energy storage
Why should you use PD IEC/TS 62607-4-4 - Thermal characterization of nanomaterials?
Energy storage devices are becoming increasingly important for many applications such as consumer devices, electric vehicles, and aircraft. Energy storage devices with high performance and reliability are the key factors to earn the confidence of customers. Also, in smart grid and renewable energy applications, where energy efficiency and reliable power supplies are critical, an energy storage system is an essential device.
PD IEC/TS 62607-4-4 specifies general testing procedures and requirements for the assessment of thermal runaway performance and risk associated with the nano-enabled energy storage devices prepared by employing nanomaterial additives and serves as the basis for further developing particular product-specific standards.
PD IEC/TS 62607-4-4 helps you improve the safety of nano-enabled energy storage device.
