The information in this technical report, PD ISO/TR 2801:2007, has been produced to assist employers (or people who advise employers) in making the necessary decisions regarding the selection, use, care and maintenance of protective clothing, for employees exposed to risks related to heat and flame (e.g. welding, firefighting).
This technical report highlights the main areas that an employer needs to consider. Most paragraphs of this Technical Report contain bullet-lists. These lists are provided to give guidance only and are not exhaustive.
ISO/TR 2801 cancels and replaces ISO 2801:1998, which has been technically revised. ISO/TR 2801 is based on CEN/TR 14560:2003.
ContentsForeword
Introduction
1 Scope
2 Terms and definitions
3 Selection
3.1 General
3.2 Risk assessment
3.3 Defining the level of protection required for each activity from the protective clothing
3.4 Collecting information on available protective clothing
3.5 Wearer trials
3.6 Additional testing
3.7 Other considerations
4 Use
4.1 General
4.2 Training
4.3 Introducing protective clothing into service
4.4 Record keeping
4.5 Routine examination
4.6 In-service evaluation and monitoring
5 Care
5.1 General
5.2 Cleaning
5.3 Decontamination
5.4 Storage
6 Maintenance
6.1 General
6.2 Inspection
6.3 Repairs and alterations
6.4 Disposal
Annex A (informative) ISO standards and their performance levels relating to clothing designed to provide protection from heat and flame
Annex B (informative) Risk assessment
Annex C (informative) Examples of relationship between type of heat/flame hazard and clothing to be chosen for protection
Annex D (informative) Guidance on some of the items that may be addressed in labelling, subject to the required use of garments
Bibliography
