PD ISO/TS 8100-3:2019

Lifts for the transport of persons and goods. Requirements from other Standards (ASME A17.1/CSA B44 and JIS A 4307-1/JIS A 4307-2) not included in ISO 8100-1 or ISO 8100-2 | Status: Project Underway, Current

What is ISO/TS 8100‑3-Lifts for the transport of persons and goods about?

ISO/TS 8100 discusses lifts for the transport of persons and goods. PD ISO/TS 8100‑3 is the third part of the ISO/TS 8100 multi-series and discusses requirements from other standards. PD ISO/TS 8100‑3 specifies the safety rules for permanently installed new passenger or goods passenger lifts, with traction, positive or hydraulic drive, serving defined landing levels, having a car designed for the transportation of persons or persons and goods, suspended by ropes, chains or jacks and moving between guide rails inclined not more than 15° to the vertical. Note 1: ISO/TS 8100‑3 does not cover lifts with:

• Drive systems other than those stated
• Rated speed ≤0,15 m/s
• Hydraulic lifts
• With a rated speed exceeding 1 m/s
• Where the setting of the pressure relief valve (5.9.3.5.3) exceeds 50 MPa;

Note 2: New passenger or goods passenger lifts in existing buildings, lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances or lifts in wind turbines and safety during operations of transport, erection, repairs, and dismantling of lifts.

Who is ISO/TS 8100‑3-Lifts for the transport of persons and goods for?

ISO/TS 8100‑3 on lifts for the transport of persons and goods useful for:

• Lift Manufacturers
• Health and safety bodies.
• Quality control personnel

Why should you use ISO/TS 8100‑3-Lifts for the transport of persons and goods?

The elevator industry has become increasingly international in nature resulting in the rationalization of many local standards and their harmonization with international standards. ISO 8100-1 and ISO 8100-2 address the requirements in many parts of the world. However, there are standards applicable in regions of the world such as North America and Japan that have differences in specific prescriptive requirements from those in ISO 8100-1 and ISO 8100-2. ISO/TS 8100‑3 provides safety parameters for permanently installed new passenger or goods passenger lifts. ISO/TS 8100‑3 provides all necessary safety requirements needed in new passenger or goods passenger lift.