What is BS EN 60870-6-702 - Telecontrol equipment and systems about?
BS EN 60870 is a series on telecontrol equipment and systems. Telecontrol equipment and systems refer to the connection of process stations spread out over a wide area to central control systems. BS EN 60870-6-702 is a functional profile (FP) and defines the provision of the TASE.2 communications services between two control centre end systems. BS EN 60870-6-702 is supported by the transport services implemented in accordance with transport profiles defined for the type of network that interconnects the control centre end systems. This FP also defines the provision of the OSI connection-mode presentation and session services between the end systems.
ISO/ISP 14226 specifies the AMM11 profiles for MMS. The parts of ISO/ISP 14226 that cover the profile that is used as a basis for this FP are ISO/ISP 14226-1 and ISO/ISP 14226-2. This FP is in alignment with ISO/ISP 14226, as far as possible, and maintains this compatibility by reference. There is TASE.2 requirements in addition to ISO/ISP 14226. These requirements are specified in this FP.
Who is BS EN 60870-6-702 - Telecontrol equipment and systems for?
BS EN 60870-6-702 on telecontrol equipment and systems is useful for:
- Telecommunication component manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
Why should you use BS EN 60870-6-702 - Telecontrol equipment and systems?
BS EN 60870-6-702 defines functional profiles to be used in telecommunication networks for electric power systems. It is largely based on existing ISO/IEC International Standards and International Standardized Profiles (ISP). The notion of functional profiles is fundamental in the organization of the IEC 60870-6 series. A description of functional profiles, their classification scheme, and the manner of defining them are laid down in IEC 60870-6-1.
BS EN 60870-6-702 for telecontrol application service element (TASE.2, also known as an inter-control centre communications protocol, ICCP) is an application-class profile (A-profile) providing communications capabilities to control centre applications. The TASE.2 in the application layer is specified. BS EN 60870-6-702 refines the application layer protocol to meet interoperability requirements and specifies requirements on the presentation and session layers support for TASE.2. TASE.2 operates in a connection mode, so this A profile needs to interface to a transport-class profile of the T-profile variety. Since TASE.2 is an MMS-based protocol, this functional profile (FP) is based on MMS profiles. In the OSI international standardized profile taxonomy, there is a category for MMS A-profiles. BS EN 60870-6-702 makes frequent use of the AMM11 profile. Using BS EN 60870-6-702 you can define the provision of the TASE.2 communications services between two control centre end systems.
