BS EN 62841-3-10:2015+A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable cut-off machines | Status: Superseded, Withdrawn

1 Scope This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive

• – bonded reinforced wheel of Type 41, or
• – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with
• – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and
• – a wheel diameter range of 250 mm to 410 mm. This standard does not apply to:
• – transportable mitre saws;
• – transportable tile saws;
• – transportable metal saws.

  NOTE 101 Transportable mitre saws are covered by IEC 62841‑3‑9. Transportable tile saws will be covered by a future part of IEC 62841‑3. Transportable metal saws will be covered by a future part of IEC 62841‑3.