BS EN 845-3:2003+A1:2008

BS EN 845-3:2003+A1:2008 Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork

BS EN 845-3 specifies the requirements for masonry bed joint reinforcement for structural use and for non-structural use.

Where products are intended for use in cavity wall construction, BS EN 845-3 covers only the performance of the meshwork as reinforcement in bed joints and not its performance as wall ties across the cavity.

BS EN 845-3 does not apply to:

a) Products in the form of individual bars or rods

b) Products formed from materials other than specified grades of austenitic stainless steel or zinc pre-coated steel sheet or zinc coated steel wire with or without organic coating.

Contents of BS EN 845-3:

• Foreword
• Scope
• Normative references
• Terms, definitions and symbols
• Terms and definitions
• Symbols
• Materials and types of products
• Materials
• Types of products
• General
• Welded wire meshwork
• Woven wire meshwork
• Expanded metal meshwork
• Requirements
• General
• Product applications and types
• Products for structural use
• Products for non-structural use
• Dimensions and limit deviations
• General
• Determination of wire size
• Determination of cross-sectional area
• Determination of other dimensions
• Mechanical strength
• Mechanical strength of bed joint reinforcement for structural applications
• Mechanical strength of bed joint reinforcement for non-structural applications
• Bond strength and lap length
• Durability
• Description and designation
• Marking
• Evaluation of conformity
• General
• Initial type tests
• Factory production control
• Sampling for initial type testing and independent testing of consignments