Documents
Free Downloads of Technical Documents, Standards, Industry Codes, and Regulations
Find documents by title, publisher, code, ISBN, or keyword.
kaixin uploaded
ASTM D445-26 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
and earned 50 points
kaixin uploaded
CSA C22.1:24 Canadian Electrical Code, Part I: Safety Standard for Electrical Installations (Twenty-sixth Edition)
and earned 50 points
kaixin uploaded
SIST EN ISO 14155:2026 Clinical investigation of medical devices for human subjects — Good clinical practice
and earned 50 points
kaixin uploaded
DIN EN ISO 18265-2013 Metallische Werkstoffe – Umwertung von Härtewerten
and earned 50 points
Service Notices
Operational updates and purchase guidance
Earn Points by Sharing Documents on AVADocuments
Share documents to earn points, then use those points to download other documents for free.
Read moreAVA Provides an Accurate Search Database
Our fast, accurate, user-friendly search engine helps you filter tens of thousands of codes, handbooks, reports, and documents to find the information you need.
Read moreWho We Serve?
AVA serves engineers, researchers, designers, inspectors, construction professionals, and maintenance and service staff.
Read moreRecently Added
Latest additions to our document catalog
ASTM D521-26
These test methods cover procedures for the chemical anal...
ASTM D445-26 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
This test method specifies a procedure for the determinat...
ASME BPE-2026: Bioprocessing Equipment
ASME BPE-2026 specifies design, materials, fabrication, a...
ASME POM 101-2013 Performance-Related Outage Inspections
Guidelines for inspecting power plant equipment during ou...
ASTM D445-26 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
This test method specifies a procedure for the determinat...
CSA C22.1:24 Canadian Electrical Code, Part I: Safety Standard for Electrical Installations (Twenty-sixth Edition)
The 2024 Canadian Electrical Code, Part I establishes saf...
Popular Product
Highest-rated product
ASTM D445-26 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
This test method specifies a procedure for the determinat...
ASME BPE-2026: Bioprocessing Equipment
ASME BPE-2026 specifies design, materials, fabrication, a...
CSA C22.1:24 Canadian Electrical Code, Part I: Safety Standard for Electrical Installations (Twenty-sixth Edition)
The 2024 Canadian Electrical Code, Part I establishes saf...
SIST EN ISO 14155:2026 Clinical investigation of medical devices for human subjects — Good clinical practice
This standard specifies good clinical practice for design...
ISO 9001-2026 Español Sistemas de gestión de la calidad — Requisitos (Sexta edición)
Establecer e implementar un sistema de gestión de la cali...
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D93-26 specifies Pensky-Martens closed-cup methods f...
ISO27k Toolkit 2026 09
ISO27k Toolkit
BS EN 14679:2026 Execution of special geotechnical works — In-Situ Soil Mixing
This standard specifies principles for executing, supervi...
BS EN 13586:2026 Cranes — Access
This standard specifies design requirements for non-power...
Random Products
Discover more documents from our catalog
ITU-T Z.169 2019
(Pre-Published) Testing and Test Control Notation version...
AS ISO IEC 19784.2-2010 amd2-2021
ISO 9635-3-2014
IEC 62769-151-1-2023
FORD WSS-M1H695-B2 1996
FABRIC, AVON III PATTERN, KNITTED, 6 MM Shown on WSS-M1H6...
ASTM F2780-20
Standard Guide for Design and Construction of Expanded Me...
ASTM D8223-19
Standard Practice for Evaluation of Fire-Retardant Treate...
ISO 18413-2015
BS 5292:1980
Specification for jointing materials and compounds for in...
DIN 4093:2012-08
Design of ground improvement - Jet grouting, deep mixing ...
FORD ESB-M2D221-C 1981
POLYURETHANE FOAM, HIGH RESILIENCE - 27 KG/CU M Shown on ...
DIN ISO 15901-1:2019-03
Evaluation of pore size distribution and porosity of soli...
IEC 60455-3-8 2013
AATCC 143 2006
Appearance of Apparel and Other Textile End Products Afte...
DIN EN 1897:2002-02
Geotextiles and geotextile-related products - Determinati...
Newly Released This Year
ASME BPE-2026: Bioprocessing Equipment
SIST EN ISO 14155:2026 Clinical investigation of medical devices for human subjects — Good clinical practice
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
BS EN 14679:2026 Execution of special geotechnical works — In-Situ Soil Mixing
BS EN 13586:2026 Cranes — Access
BS EN 13238:2026 Reaction to fire tests for building products — Conditioning procedures and general rules for selection of substrates
ASTM D613-26 Standard Test Method for Cetane Number of Diesel Fuel Oil
ISO 14001:2026 — Environmental management systems — Requirements with guidance for use
ISO 9001:2026 — Quality management systems — Requirements
BS EN 13445-6:2026 Unfired pressure vessels Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
BS EN 13445-5:2026 Unfired pressure vessels Part 5: Inspection and testing
BS EN 13445-3:2021+A1:2026 Unfired pressure vessels Part 3: Design
SAE J1063-2026 (R) Cantilevered Boom Crane Structures - Method of Test
SAE J1798/1 MAY2026 Recommended Practice for Performance Rating of Lead Acid and Nickel Metal Hydride Electric Vehicle Battery Modules
SAE J1819-2026 Securing Child Restraint Systems in Motor Vehicles
BS EN 10253-1:2026 Butt-welding pipe fittings Part 1: Wrought carbon steel for general use and without specific inspection requirements
SAE J2719-2026 (R) Hydrogen Fuel Quality for Fuel Cell Vehicles
SAE J2836/5 MAR2026 (R) Use Cases for Customer Communication for Plug-In Electric Vehicles
SAE J2945/1A MAR2026 Vehicle Level Validation Test Procedures for V2V Safety Communications
Implementation of statistical process control (SPC) — Part 1: Statistical process management — Elements, tools and techniques of SPC
D1000 − 26 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D883-26 Standard Terminology Relating to Plastics
Standard Test Methods for Coated Fabrics
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Standard Terminology Relating to Materials for Roads and Pavements
ASTM D323-26 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
BS EN 14972-13:2026 Fixed firefighting systems — Water mist systems Part 13: Test protocol for wet benches and other similar processing equipment for open nozzle systems
BS EN 14972-2:2026 Fixed firefighting systems — Water mist systems Part 2: Test protocol for shopping areas for automatic nozzle systems
BS EN 14951:2026 Solid hardwood panelling and cladding — Machined profiles
BS EN 14906:2026 Leather — Leather for automotive — Test methods and testing parameters
BS EN 13856:2026 LPG equipment and accessories — Minimum requirements for the content of the user manual for automotive LPG systems
BS EN 13848-6:2026 Railway applications — Track — Track geometry quality — Part 6: Characterization of track geometry quality
Transportable gas cylinders — Battery vehicles and multiple-element gas containers (MEGCs) — Design, manufacture, identification and testing
BS EN 13126-19:2026 Building hardware — Hardware for windows and door-height windows — Requirements and test methods — Part 19: Sliding closing devices
BS EN 13100-3:2026 Non-destructive testing of welded joints in thermoplastics semifinished products - Part 3: Ultrasonic testing
BS EN 12666-1:2026 Plastics piping systems for non-pressure underground drains and sewers — Polyethylene (PE) — Part 1: Specifications for pipes, fittings and the system
BS EN 12608-1:2026 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors — Classification, requirements and test methods — Part 1: Non-covered PVC-U profiles
BS EN 12485:2026 Chemicals used for treatment of water intended for human consumption — Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime — Test methods
BS EN 12350-13:2026 Testing fresh concrete - Part 13: Bleeding test - Static and pressure
BS EN 12131:2026 Feather and down — Test methods — Determination of the quantitative composition of feather and down (manual method)
ISO 25003:2026 Traditional Chinese medicine — Gentiana scabra, Gentiana manshurica, and Gentiana triflora root and rhizome
ASTM D653-26a Standard Terminology Relating to Soil, Rock, and Contained Fluids
Standard Test Method for the Sieve Analysis of Coke
ISO 30201:2026 Human resources management systems — Requirements
BS EN 13445-11:2026 Unfired pressure vessels Part 11: Additional requirements for pressure vessels of titanium and titanium alloys
BS EN 13445-4-2026 Unfired pressure vessels Part 4: Fabrication
BS EN 13445-2:2026 Unfired pressure vessels Part 2: Materials
BS EN 13445-1:2026 Unfired pressure vessels - Part 1: General
SAE J661 APR2026 Brake Lining Quality Test Procedure
SAE J840 MAR2026 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J902™ APR2026 Passenger Vehicle Windshield Demisting and Defrosting Systems
SAE J973™ MAR2026 (R) Ignition System Measurements Procedure
SAE J1117-2026 Method of Measuring and Reporting the Pressure Differential Flow Characteristics of a Hydraulic Fluid Power Valve
SAE J1228-2026 Small Craft - Marine Propulsion Engine and Systems - Power Measurements and Declarations
SAE J1326-2026 Test Method for Measuring Wet Color Transfer Characteristics
SAE J1598-2026 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
SAE J1691™ APR2026 Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
SAE J1739-2026 Potential Failure Mode and Effects Analysis (FMEA) Including Design FMEA, Supplemental FMEA-MSR, and Process FMEA
SAE J1756-2026 Determination of the Fogging Characteristics of Interior Automotive Materials
SAE J1942-2026 Hose and Hose Assemblies for Marine Applications
BS EN 10365:2026 Hot rolled steel channels, I and H sections — Dimensions and masses
SAE J2177-2026 Chassis Dynamometer Test Procedure - Heavy-Duty Road Vehicles
SAE J1939-75-2026 Application Layer - Generator Sets and Industrial
SAE J2174-2026 Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width
SAE J2315-2026 Wheel Nut Seat Strength
SAE J2115-2026 (R) Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer
SAE J1645-2026 Fuel Systems and Components - Electrostatic Charge Mitigation
SAE J1180 FEB2026 Telescopic Boom Length Indicating System
Wheels - Passenger Car and Light Truck Performance Requirements and Test Procedures
SAE J1469-2026 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
SAE J442-2026 (R) Tools for Peening Intensity Determination and Verification
SAE J2394-2026 Seven Conductor Cable for ABS Power - Truck and Bus
SAE J2425-2026 (R) Steering Control Systems - Heavy Trucks
SAE J2497™ MAR2026 Power Line Carrier Communication for Commercial Vehicles
SAE J2519-2026 Guidelines and Procedures for Horizontal Directional Drilling (HDD) Machine Tracking Equipment Operators
SAE J2520-2026 Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment
BS EN 12096:2026 Mechanical vibration — Declaration and verification of vibration emission values
Wheel and Wheel Trim Weathering Testing for Paint Coatings
HFC-134a (R-134a) Recovery/Recycle/Recharging Equipment for Mobile Air-Conditioning Systems
SAE J2945™/1 MAR2026 On-Board System Requirements for V2V Safety Communications
SAE J2971-2026 Truck and Bus Aerodynamic Device and Concept Terminology
SAE J3026-2026 Ambulance Patient Compartment Seating Integrity and Occupant Restraint
SAE J3078/6 FEB2026 Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 6: Determination of Effect of Solar Heating
SAE J3081-2026 Heavy Vehicle Controls Prioritization and Conflict Resolution
SAE J3096™ APR2026 Cooling System Nonmetallic Caps and Filler Necks - Threaded Construction
SAE J3227-2026 Terminology and Measurement Methodology for Determining Vehicle Overlap in Offset-Frontal Crashes
SAE J3261 FEB2026 Recommendations for ADS-DVs to Accommodate the Needs of People with Disabilities
SAE J3297-2026 Analysis of Network V2X-Based Services and Opportunities for Standardization
SAE J3292™ APR2026 Automated Vehicle Marshalling System
Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
BS EN 12541:2026 Sanitary tapware — Pressure flushing valves and automatic closing urinal valves PN 10
SAE J2332™ MAR2026 Marking of Rubber Parts
AS 2026-2003
SAE J3007 MAY2026 Top Speed Test Procedure for Electric Motorcycles
AAMA 611-26 Specification for Anodized Architectural Aluminum
IEEE 1451.1.6-2025
IEEE 1683-2025
IEEE 1815.2-2025
IEEE 1918.1-2024
IEEE 1953.1-2025
IEEE 2023-2025
IEEE 2427-2025
ISO/IEC/IEEE 24748-10-2025
ISO/IEC/IEEE 24748-4-2025
ISO/IEC/IEEE 24748-7-2025
ISO/IEC/IEEE 26516-2025
IEEE 2751-2025
IEEE 2805.2-2025
IEEE 2992-2025
IEEE 3079.3.1-2025
IEEE 3158.1-2025
IEEE 3378-2025
IEEE 3381-2025
IEEE 3461-2025
IEEE 3539-2025
IEEE 3832-2025
IEEE 7012-2025
IEEE C37.119-2025
IEEE C37.13.1-2025
IEEE C57.13.10-2025
ISO 2026-2020
JIS F 2026-1976
API RP 2026-2022
How Access Works
Search and confirm
Find the correct title, publisher, edition, and format before purchase.
Earn Points
Recharge your account or share documents to earn points.
Download from your account
Purchased files remain available through your account and order history.
Use under license terms
All documents are governed by publisher copyright and usage requirements.
Select a points package
Pick the plan that matches your download volume. Points are credited to your account after successful recharge.
$100
1,000Points
Choose VIP1 Starter
$500
10,000Points
Choose VIP2 Plus
$1000
30,000Points
Choose VIP3 Popular
$1700
100,000Points
Choose VIP4 Pro
$3600
500,000Points
Choose VIP5 Enterprise
Need more free downloads?
Upload useful documents, reports, and standards. Approved uploads may earn points that you can use for future downloads.
Recharge FAQ
- Where can I see my points?Your account dashboard shows your available points and recent account activity.
- Can points be used immediately?Points are available after the recharge is completed and credited to your account.
- Can I ask for a custom package?Contact support if your team needs a higher-volume recharge or account assistance.
Points
View Points Packages
Recharge more, download more documents
Choose a points package for frequent access to documents, reports, standards, and technical files.
Points recharge helps you download documents.
Use points to download documents, reports, standards, and technical files. You can also earn points by sharing useful technical files.
Get points
Recharge a points package for document downloads.
Download faster
Keep points in your account and access required files without repeating checkout steps.
Earn more for free
Upload useful documents to earn points that can be used for future downloads.